Week#
|
Subject
|
1
|
Introduction to the course
Reading Assignment: Chapter 1
|
Class and lab session requirements. |
|
Mechanical properties, non-mechanical properties, issues related to
material specifications, testing, and quality control and assurance.
|
|
Introduction to lab devices and testing methods, testing standards
(ASTM). |
(No lab session this week)
|
2, 3
|
Metals (Ch 3, 4, and Handouts)
|
Fundamental Properties of Engineering Metallic Materials |
|
Application on Tension test of Steel and Aluminum |
Lab#1: Direct Tension Test of metals (Steel & Aluminum).
Lab report #1 on Direct Tension Test of Metals.
|
4, 5
|
Aggregates (Chapter 5)
|
Sources, Uses, Properties and benefaction by blending. |
|
Weight-Volume Relationships and Specific Gravity calculations. |
Lab#2: Lab tour, policy, and
sieve analysis and dry rodded unit weight
Lab#3: Specific gravity and absorption tests for coarse and fine
aggregates.
Lab report preparation.
Lab report#2 on aggregates.
|
6
-10
|
Portland Cement Concrete Mixes (Chapters 6, 7)
|
Types and Properties of Portland cement |
|
Absolute Volume Concept and Analysis. |
|
Proportioning of PCC mixes |
|
Properties of fresh and hardened concrete |
|
Testing (compressive, tensile and flexural) |
|
Advanced topics (fiber reinforced concrete, polymer modified PCC
mixes) |
Lab#4: PCC mix design and
preparation of materials for PCC mixes
Lab#5: Mixing and preparation of PCC
test specimens.
Lab#6: Compressive strength and
Split Tensile tests
Lab#7: Flexural strength tests.
Lab#8: Possible Field Trip and Lab
report preparation.
Lab report #3 on PCC
|
|
Exam #1 to be conducted in week #7.
|
11-12
|
Asphalt Binders and Mixtures (Chapter 9)
|
Introduction to pavement materials, PCC and asphalt pavements |
|
Asphalt binders; types, grades, production. |
|
Binder properties and tests. |
|
Design of hot-mix asphalt using Hveem method |
|
Introduction to Superpave volumetric design system |
Lab#9 Asphalt binders
viscosity test
Lab#10 Bulk Specific Gravity and Volumetric analysis.
Lab report #4 on Asphalt materials
|
|
Exam #2 is to be conducted in week #11.
|
13 -
15
|
Wood and wood products (Chapter 10)
|
Structure, physical properties, mechanical properties, and defects
in lumber |
|
Engineered wood products |
Lab#11 Wood testing
(Compression and Bending tests)
Lab#12
Wood testing � Shear Test
Lab report #5 on Wood
|
Wk
14
|
Thanksgiving Holidays - Semester Recess
|
Wk
16
|
Composites (Chapter 11)
|
Micro and Macro Composites |
|
Properties of composites,
Loading parallel and perpendicular to fibers |
.
|
17
|
Final Exams
|