LIST OF PUBLICATIONS
M. Basirat, T. Shrestha, L. Barranyk, G. P. Potirniche and I.
Charit. A Creep Damage Model for
High-Temperature Deformation and Failure of 9Cr-1Mo Steel Weldments, Metals, vol. 5, no. 3, pp. 1487-1506,
doi:10.3390/met5031487, 2015
Andrews, B., Potirniche, G.P. Constitutive
Creep-Fatigue Crack Growth Methodology in Two Steels Using a Strip Yield Model,
Engineering Fracture Mechanics, vol.
140, pp. 72-91, 2015
T. Shrestha, S.F. Alsagabi,
I. Charit, G. P. Potirniche, and Michael V. Glazoff, Effect of Heat Treatment on the
Mechanical Properties of Modified 9Cr-1Mo Steel, Metals, vol. 5, no 1, pp. 131-149; doi:10.3390/met5010131, 2015.
Rostamian, M. Johnson, G., Hiruta, M.,
Potirniche, G.P., Ougouag, A.M., Cogliati,
J.J., Tokuhiro, A. Computational
and experimental prediction of dust production in pebble bed reactors – Part I,
Nuclear Engineering and Design, vol.
263, pp.500-508, 2013
Hiruta, M., Johnson, G., Rostamian, M., Potirniche, G.P., Bertino,
M., Franzel, L, Tokuhiro, A. Computational
and experimental prediction of dust production in pebble bed reactors – Part II,
Nuclear Engineering and Design, vol.
263, pp.509-514, 2013
Shrestha, T., Basirat,
M., Charit, I., Potirniche, G.P, Rink, K.K. Creep
rupture behavior of Grade 91 steel, Materials
Science and Engineering A, vol. 565, pp. 382-391, 2013
Potirniche, G.P. A
numerical strip-yield model for the creep crack incubation in steels, Journal of the ASTM International, Selected
technical papers STP 1546, vol. 38, pp. 197-214, 2012
Basirat, M., Shrestha,T.,
Potirniche, G.P., Charit, I., Rink, K. A
study of the creep behavior of modified 9Cr-1Mo steel using continuum-damage
modeling, International Journal of
Plasticity, vol. 37, pp. 95-107, 2012
Shrestha, T., Basirat,
M., Charit, I., Potirniche, G.P, Rink, K.K., Sahaym, U. Creep
deformation mechanisms in modified 9Cr-1Mo steel, Journal of Nuclear Materials, vol. 423, pp. 110-119, 2012
Rostamian, M., Potirniche, G.P., Cogliati, J., Ougouag, A.,
Tokuhiro, A. Computational
prediction of dust production in pebble bed reactors, Nuclear Engineering and Design, vol. 243, pp. 33-40, 2012
McAnulty, M.J,
Potirniche, G.P., Tokuhiro, A. The
application of an internal state variable model to the viscoplastic
behavior of irradiated ASTM 304L stainless steel, Nuclear Engineering and Design, vol. 250, p. 1-7, 2012
Hall,
K.J., Potirniche, G.P. A
three-dimensional edge-crack finite element for fracture mechanics applications,
International Journal of Solids and
Structures, vol. 49, no. 2, pp. 328-337, 2012
Rostamian, M., Arifeen, S.,
Potirniche, G.P., Tokuhiro, A. Initial prediction
of dust production in pebble-bed reactors, Journal of Mechanical Sciences, vol. 2, pp. 189–195, 2011
Abdelnaby, A.H., Potirniche, G.P., Barlow,
F., Elshabini, A., Parker, R. A comparison of back
grinding processes for bare silicon and through-silicon via wafers using
numerical simulations, Journal of
Microelectronics and Electronic Packaging, vol. 8, no. 4, pp. 146-153, 2011
Shrestha,
T., Basirat, M., Charit,
I., Potirniche, G.P., Rink, K. Creep
studies of modified 9Cr-1Mo steel for very high temperature reactor pressure
vessel applications, Ceramic
Transactions, Advances in Materials Science for Environmental and Nuclear
Technology II, vol. 227, pp. 231-240, 2011
Abdelnaby, A.H.,
Potirniche, G.P., Barlow, F., Poulsen, B., Elshabini, A., Parker, R., Jiang, T. Numerical
simulations of a back grinding process for silicon wafers. Ceramic transactions,
Advances and Applications in Electroceramics,
vol. 226, pp. 3-12, 2011
Potirniche, G.P., Pascu, A.,
Stillman, D., Lin. T-.L., Wang, P.T., Horstemeyer, M.F. A visco-hyperelastic
model for the thermo-mechanical behavior of polymer fibers, International Journal of Damage Mechanics,
vol. 20, pp. 1002-1020, 2011
Horstemeyer, M. F., Farkas, D., Kim, S., Tang, T., Potirniche, G.P. Nanostructurally small cracks (NSC): Review on atomistic
modeling of fatigue, International
Journal of Fatigue, vol. 32, pp. 1473-1502, 2010
Castro, A., Potirniche, G. P. Multi-mechanism
strip yield model for fatigue crack growth, International Journal of Fatigue, vol. 32, pp. 1764-1773, 2010
Potirniche, G. P., Hearndon,
J. L., Daniewicz, S. R., Parker, D., Cuevas, P.,
Wang, P. T., Horstemeyer, M. F. A
two-dimensional damaged finite element for fracture applications, Engineering Fracture Mechanics, vol. 75,
pp. 3895-3908, 2008
Hearndon,
J. L., Potirniche, G. P., Parker, D., Cuevas, P. M., Rinehart, H., Wang, P. T., Horstemeyer, M. F. Monitoring
structural damage of components using an effective modulus approach, Theoretical and Applied Fracture Mechanics,
vol. 50, pp. 23-29, 2008
Potirniche, G. P., Horstemeyer,
M. F., Ling, X. W. A
thermodynamic model of polycrystalline damage with internal state variables,
Mechanics of Materials, vol.
39, pp. 941-952, 2007
Potirniche, G. P., Horstemeyer, M. F., Gullett, P.
M., Jelinek*,
B. Atomistic
modeling of fatigue crack growth and dislocation structuring in FCC single
crystals, Proceedings of the Royal Society A, vol. 462, pp.
3707-3731, 2006
Johnston, S. R., Potirniche, G. P., Daniewicz, S. R., Horstemeyer, M.
F. Three-dimensional
finite element simulations of microstructurally small fatigue crack growth in
7075 Aluminum Alloy, Fatigue and Fracture of Engineering Materials and
Structures, vol. 29, pp. 697-605, 2006
Potirniche, G. P., Horstemeyer,
M. F. On
the growth of nanoscale fatigue cracks, Philosophical Magazine Letters,
vol. 86, no. 3, pp. 185-193, March 2006
Potirniche, G. P., Hearndon, J. L., Horstemeyer, M. F.,Ling, X. W. Lattice
orientation effects on void growth and coalescence in fcc
single crystals, International Journal of Plasticity, vol. 22, No.
5, pp. 921-942, 2006
Potirniche, G. P., Horstemeyer,
M. F., Wagner, G. J., Gullett, P. M. A
molecular dynamics study of void growth and void coalescence in single crystal
nickel, International Journal of Plasticity, vol. 22, no.2, pp.
257-278, Feb. 2006
Potirniche, G. P., Horstemeyer,
M. F. B. Jelinek, Wagner,G.J. Fatigue
damage in nickel and copper nanocrystals, International Journal of
Fatigue, vol.27, no. 10-12, pp. 1179-1185, 2005
Ling, X. W., Horstemeyer, M.
F., Potirniche, G. P. On the
numerical implementation of 3D rate-dependent single crystal plasticity
formulations, International Journal for Numerical Methods in Engineering,
vol. 63, no. 4, pp. 548-568, 2005
Daniewicz, S. R., Potirniche, G. P. Modeling
fatigue crack growth threshold development for a microstructurally small crack,
Engineering Fracture Mechanics, vol. 72, no. 9, pp. 1438-1453, 2005
Potirniche, G. P., Barlat,
F., Daniewicz,
S. R., Garratt, M., Bray, G. The
influence of plastic anisotropy of textured aluminum alloys on crack tip
plastic zone, Fatigue and Fracture of Engineering Materials and
Structures, vol. 27, no.
12, pp. 1157-1169, 2004
Potirniche, G. P., Daniewicz, S. R., Newman, J.C. Simulating
small crack growth behavior using crystal plasticity theory and finite element
analysis, Fatigue and Fracture of Engineering Materials and Structures,
vol. 27, pp. 59-71, 2004
BOOK CHAPTERS
Collins, J.A., Potirniche, G.P., Daniewicz,
Daniewicz, S.R.
“Failure
Modes: Performance and Service Requirements for Metals”, Mechanical
Engineers’ Handbook: Materials and Mechanical Design, 4th Ed., Vol.1, Editor:
M. Kutz, Wiley, 2015
Horstemeyer, M. F., Potirniche, G.P. and Marin, E. B. Meso-Macroscale Continuum Modeling: Crystal Plasticity,
Handbook for Computational Material
Science, S.Yip (ed.), pp. 1133-1149, Springer,
2005
MAGAZINE
ARTICLE
Abdelnaby, A.H., Potirniche, G.P., Barlow, F., Elshabini,
A., Parker, R., Jiang, T. Simulation of back grinding process for silicon
wafers. ABAQUS Insights, p. 20,
May/June 2010
CONFERENCE PROCEEDINGS
Arifeen, S., Wolemiwa, V., Nwoke,
D., Barannyk, L., Potirniche, G.P., Barlow, F. Finite
element analysis and fatigue life prediction of aluminum alloy braze for high
temperature thermoelectric generator package assembly, International Mechanical Engineering Congress & Exposition
(IMECE2014), Toronto, Canada, November 14-20, 2014, (peer-reviewed, on CD,
will be published in proceedings)
Andrews,
B., Potirniche, G.P. Explicit and implicit lifetime assessment methods of
9Cr-1Mo steel under compbined creep and fatigue loads
using a strip yield model, International
Mechanical Engineering Congress & Exposition (IMECE2014), Toronto,
Canada, November 14-20, 2014, (peer-reviewed, on CD, will be published in
proceedings)
Arifeen,
S., Potirniche, G.P., Elshabini, A., Barlow, F. Modeling of Failure in Aluminum Alloy Braze
for a High Temperature Thermoelectric Assembly, IMAPS 2013- 46th
International Symposium on Microelectronics, October 2013.
Abdelnaby, A.H., Potirniche, G.P., Barlow,
F., Elshabini, A., Groothuis,
S.K., Parker, R. Numerical Simulation of Silicon Wafer Warpage Due to
Thin Film Residual Stresses, In: 2013 IEEE Workshop
on Microelectronics and Electronic Devices (WMED), Boise, ID, April 2013,
best paper award in the Process Division
Basirat, M. , Shrestha, T., Potirniche, G.P., Charit,
I., Rink, K. Creep Damage Analysis in Welded Joints of Modified 9Cr-1Mo
Steel, American Nuclear Society (ANS)
meeting, November 11-15, 2012, San Diego, CA
Potirniche,
G.P., Stillman, D., Lin, T.-L. A two-dimensional
shell element for coupled visco-hyperelastic and
damage behavior of polymeric fabrics, ICDM – International Conference on Damage Mechanics, Belgrade, Serbia, pp.
265-268, June 25-27, 2012
Abdelnaby, A.H., Potirniche, G.P., Barlow,
F., Elshabini, A., Groothuis,
S.K., Parker, R. Numerical simulation of heat generation during the back grinding process
of silicon wafers, In: 2012 IEEE Workshop
on Microelectronics and Electronic Devices (WMED), Boise, ID, April 2012
Wuthrich ,Z., Shrestha,T., Charit,I., Rink,K., Basirat,M.,
Potirniche, G.P. Studies of the effects of heat treatment on hardness and creep
behavior for a modified 9Cr-1Mo Steel, ASME
2011 International Mechanical Engineering Congress & Exposition, on CD,
Denver Co, Nov. 11-17, 2011
Abdelnaby, A.H., Potirniche, G.P., Barlow, Elshabini, A., Parker, R. Finite Element Modeling of a Back
Grinding Process for Through Silicon Vias. In: 2011 IEEE Workshop on Microelectronics and
Electronic Devices (WMED), Boise, ID, pp. 19-22 ,
April 22, 2011
Kulkarni,
S., Arifeen, S., Patterson, B., Potirniche, G.P.,
Barlow, F. Evaluation of Ceramic Substrates for High Power and High Temperature
Applications, IMAPS/ACerS
7th International Conference and Exhibition on Ceramic Interconnect and Ceramic
Microsystems Technologies (CICMT 2011), San Diego, CA, April 5-7, 2011
Abdelnaby, A.H.,
Potirniche, G.P., Barlow, F., Poulsen, B., Elshabini, A., Parker, R.,
Jiang, T. Numerical simulations of a back grinding process for
silicon wafers. In: Ceramic Transactions,
the Proceedings of the Materials Science & Technology Conference,
Houston, TX, Oct. 17-21, 2010
Tokuhiro,
A., Potirniche, G.P., Rink, K. Phenomena identification ranking table and
knowledge-base gaps and needs for the modular
high-temperature gas-cooled reactor. In Proceedings
of ICAPP ’09, Tokyo, Japan, May 10-14, 2009
Potirniche, G.P., Middleton,
J., Gomez, R., Bain, B., El Kadiri, H., Rhee, H.,
Williams, N., Wang, P., Horstemeyer, M. F. A study of
monotonic and cyclic properties of lens fabricated 4140 and AISI 4140 steel
alloys, Materials Processing and Manufacturing Division Symposium, The Minerals, Metals &
Materials Society, March 2007
Potirniche, G.P., Horstemeyer, M. F., Gullett, P.
M. Fatigue crack growth simulations in nanocrystalline
materials, 9th International
Fatigue Congress, on CD, Atlanta, Georgia, May 14-19, 2006
Daniewicz, S. R., Potirniche, G.P., Johnston, S. R. A mechanics
based study of the fatigue crack growth threshold size effect, 9th
International Fatigue Congress, on CD, Atlanta, Georgia, May 14-19, 2006
Horstemeyer, M. F., Potirniche, G.P., Hearndon,
J. L., Ling, X.W. On the void growth in single crystals. In “Dislocations,
Plasticity, Damage and Metal Forming: Material Response and Multiscale
Modeling”, Proceedings of Plasticity ‘05,
pp. 628-630, 2005
Barlat, F., Potirniche, G.P., Garratt, M., Daniewicz, S.R., Bray, G. Modeling anisotropy of the
plastic zone near a crack tip in aluminum alloy extrusions, Proceedings 1st International Symposium on
Metallurgical Modeling for Aluminum Alloys, American Society of Materials,
Pittsburgh, pp. 27-32, Sept. 2003
Potirniche, G.P., Harris,
J.J., Horstemeyer, M. F., Daniewicz,
S.R. Prediction of S/N Curves for
Aluminum Alloy 2024 using fatigue crack methodologies, Proceedings 1st International Symposium on Metallurgical Modeling
for Aluminum Alloys, American
Society of Materials, Pittsburgh, pp. 21-26, Sept. 2003
Potirniche, G.P., Barlat,
F., Daniewicz, S. R., Bray, H., Garratt, M. Influence of average texture and
anisotropy on the plastic zone near a crack tip in aluminum alloys, Proceedings
8th Intern. Symp. Plasticity & Impact Mechanics
(IMPLAST 2003), Ouseph for Phoenix Publishing
House, New Delhi, pp. 143-150, March 2003